A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
:鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance. :鰻山師@故障中:2007/11/20(火) 07:51:41 ID:erj6Z00v0 A Problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file:K7sentry.sys PAG_FAULT_IN_NONPAGED_AREA if this is the first time you've seen this stop error screen. restart your computer, if this screen appears again, follow these stops; check to make sure any new hardware or software is properly installed if this is a new installation,ask your hardware or software manufacturer for any windows updates you might need, if problems continue,disable or remove any newly installed hardware or software. Disable Bios memory options such as caching or shadowing, if you need tuse safemode to remove or disable components,restart your computer, press F8 to select Advanced start up options, and then select safemode technical information; ***stop:0x00000050(0XFFBDF000,0x00000000,0xf002570e, 0x00000000) K7sentry.sys-adress f002570e base at f00lf000,datestamp 43dc5c05 Beginning dump of physical memory physical memory dump complete, contact your system administrator or technical support group for further assistance.
Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.